Rolling Shutters


General Rolling Shutter with construction as per IS 6248

Motorized, Mechanical Gear or Manually Operated

Push Button or Remote Operation for Motor

60 and 120 Minute Fire Rated Rolling Shutter with CPRI Certification

Wicket Door for pedestrian access

Infra-Red Cross Beams for obstruction safety

Perforated and Grill design available

Photo Gallery

Technical Details

Construction Details
MaterialCold Rolled, Galvanized Iron, Stainless Steel
Sheet thickness0.9 mm (22 guage), 1.0 mm (20 guage), 1.2 mm (18 guage)
Profile height75 mm (center-to-center)
Profile depth12 mm (at center)
Profile shapeCurved
Side guide channels, lock plates, brackets, hoodAs per IS 6248 for respective sizes
Curtain typeSingle skin, Double skin for Fire Rated Rolling Shutters
Fire Rating60 and 120 Minute Fire Rated
Fire Rating Testing StandardsIS 3614 Part 2, BS 476 Part 22
Wind ResistanceSpecial guide channel design for high wind loads, available as per request
Grills8m, 10mm Round Steel Bars
Perforated Slat profileAvailable as per request
Wicket DoorAvailable as per request
Motor DetailsCompact Single-Phase (1P) 230V or Three-Phase (3P) 440V with 3 Push-button station - Up, Down and Stop, with integrated limit switches, manual chain over-ride for power failure, gear & brake control
FinishChoose from over 2000 colour shades from the RAL palette. Powder Coating minimum 70 microns/ Zinc rich epoxy primer (35 microns) followed by Polyurethane (PU) Paint (35 microns)
Stainless Steel 2B Mill Finish
AccessoriesIR Remote control, IR Cross-beams for obstruction safety, Bottom Rubber Seals

*Refer detailed technical specifications for further information


Catalogue/ Brochure

SIGNUM Rolling Shutter Catalog

Technical Specifications

SIGNUM General Rolling Shutter Technical Specifications

SIGNUM Fire Rated Rolling Shutter Technical Specifications


Installation Procedure

Maintenance Manual